32Feet Silicone Fiberglass Sleeves Electric Wire Insulation Heat Shield Wrap Lot

Description

Product Description:
Model: High Temperature Protective Sleeve
Material: fiberglass silk tube
Coating Material:Silicone Resin
Product specifications: Φ4mm - Φ70mm;
Dielectric strength: 10KV;
Color: Black
Temperature range: -60 ° C + + 300 ° C, 800 ° C within 5 minutes, 1300 ° C within 30 seconds;
Flame retardant: self-extinguishing ULVW-1;
100% QUALITY MATERIAL : Heat shield sleeve mainly made of high quality fiber glass.
EFFECTIVELY :This wire heat shield is easy to installation .Capable of reducing up to 60 percentage of radiant heat.Fiberglass sleeving Withstands operating reflective temperature of 600℉continuous and 1100℉intermittent.Simply pull the wires inside ,AN hoses,cables etc.
PERFECT FIT:Heat shield car black fiberglass hot rod sleeve helps to prevent vapor lock, protects wires from melting, protecting sensitive wire looms form close proximity heat,shielding brake lines and hose and stopping clutch cables from melting.It can expand and contract over fittings,cable,terminals and more.
These sleeves are widely used for supplementary insulation on transformer, motor, generator and resistor leads etc.
It is commonly used for insulation and protection of household electrical appliances, electro-heat devices, special illuminations etc where high working temperature and high voltage are required.
properties:
1. Multiple protections to protect workers' health
2. Superior high temperature resistance
3. Splashproof multiple protection
4. Thermal insulation, energy saving and consumption reduction, radiation resistance
5. Moisture resistant, oil resistant, weatherproof, environmentally friendly, extend the life of the devices
6. Ozone resistance, voltage resistance, arc resistance, corona resistance
7. Flame retardant, reduce the occurrence of fire and the rate of spread
Field of application:
1. High temperature areas in the energy, chemical and other industries;
2. Iron and steel, smelting plants, heating zone cables, liquid lines, inlet quick-change connections, rolling zone roller tables, rolling mill cables, oil lines, sawing peripheral cables, oil lines and connections, cables, generator sets, electrical voltage devices, large construction, hydraulic systems, vehicle wiring harnesses and exhaust pipes, pan cable coatings, etc .;
3. Fire-retardant and flame-retardant protection for trains, high-speed rails, vehicle interior pipes and exhaust pipes;
4. It offers long-term and reliable insulation protection in a high temperature environment of 300 ° C, prevents radiation and heat waves and withstands the impact of 1300 ° C high temperature melt or high temperature liquid in a short time.
Test objects and results:
High temperature bending test: no aging and cracking on the surface or no peeling on the surface of the coating after heating for 48 hours in a constant temperature oven at 260 ° C;
Low temperature bending test: no cracking or peeling of the surface of the coating film after heating for 1 hour in a constant temperature oven to -70 ° C;
Coating film coating test: After continuous use of the oven test at constant temperature, there is no surface detachment or dissolution.
Burn test: flame retardant self-extinguishing and no auto-ignition phenomenon (according to ULVW-1 and CSAHFS test);
Temperature resistance test: 2000 hours 260 ℃ heating test is normal without abnormal, 30 seconds 1200 ℃ heating test glass fiber intact;
Flame retardancy test: The burning rate is at least 45 s / 25 mm.
Breakdown voltage: Depending on the wall thickness, the dielectric strength can be between 10KV and 30KV.
Package Include: According to your Choose!
Silicone Fiberglass Fire Sleeve made of glass fiber and silicone coating
Continuous working temperature: -10°C to +200°C
and can withstand 4000V for 15-30 seconds.
self-extinguishing(off self time :10s ）
Burning resistance :UL VW-1
The average voltage:A2
Fire Proof Resistant /Flame Retardant Burn protection
High temperature /Thermo Armor/heat shield
Provides Excellent Electrical Insulation
corrosion Aging Frost wear Bend Resistance
This Fire sleeve is measured by inner diameter
Note:
The diameter of Silicone Fiberglass Fire Sleeve is measured as a round tube, not flat,
so make sure the cable wire hose is larger than what you are covering
Multiple qty buys will be supplied as continuous length
Application
It can provide long-term effective heat insulation protection in a high temperature environment
Suitable for protecting cables, heat insulation, oil circuits, hoses ,Prevent burns during maintenance under the hood
For Electrical Wiring Bundling industrial Engineering equipment Home Vehiecle Camper Boat Cable Insulation Wrap
For Hose Lines fuel lines, hydraulic and oil lines Protection against heat and hoses in case of fire so that critical systems can
function longer in the aviation and marine fields
Payment
We accept Paypal/Credit Card payment through Ebay Checkout ONLY. .
Payment must be received within 7 days (from the auction ended date).
Paypal buyers must have a confirmed address as the registered shipping address.
Buyer must use checkout to complete the transaction. Otherwise, it might delay the ordering shipping time
Shipping
All Of Our Item will be sent via USPS.
24~48hours Shipped: We will ship your order out within 24~48
hours.
Local Pickup :We offer Local Pickup with free shipping，you can get your item directly from our warehouse.
Returns
We are offering 30 days return policy for any defect item.Pl
ea
s
e
contact us for help and return details.
All damaged packages must be reported after receiving 5 days.
No claims whatsoever will be accepted if the damage was caused by customer's abuse, negligence, or incorporated installation
Return items must be in original box and include all of the original accessories.
Customer Service
Our working time: 9:00am-6:00pm(Monday to Friday),Please feel free to contact us if you have any question.
Feedback
Your Satisfaction is the best feedback for us,hope give us five stars.
It is very appreciated if you can write a positive review for us.