Large Water Cooling Peltier Kit - 4x TEC1-12715, 2 Pumps, 80*80 blocks, tubing

Description

Water Cooling 4 Chip Kit
A high quality kit consists of:
Two large 80*80*15mm water blocks. These blocks are not like your cheap-o 40*40 blocks that arrive bent, dinged up, with poor surface quality. They are large, heavy (200 grams each), and lapped flat.
Four top quality TEC1-12715 Peltier chips by Cold&Colder. The chips have double the performance of TEC1-12706's. The best way to get the most out of them is run them at lower voltages, around 3-6 volts. You can accomplish this by wiring the four chips in series (+ to - in daisy chain) to get 3 volts per chip with a 12 volts power supply, or 2 in series, 2 in parallel for 6V per chip
. 6V is ideal if you want freezing output and 3V is ideal for general "air conditioning" type work where you want cooling without freezing.
Two 12V silent brushless miniature water pumps. Amazing mini water pumps that you would use (one for cold side and one for hot side) that we sell for a piece.
10 feet of premium pure silicone 1/4" x 3/8" tubing. Silicone will not age, crack, or crease, and remain soft and pliable for many years.
We sell 80*80mm
Indium thermal interface pads for this kit separately, available here (click).
This allows you to put together a water cooling module that can operate at u
p to 320 Watts if connecting 4 chips in parallel.
Examples how to use this kit:
Pull heat from one tub of water and into another, cooling one of the tubs of water to freezing or below if needed
Build your own air conditioner by simply adding a radiator to both sides of the setup
All parts are top quality.