MIG Welder Inverter 110V Flux Core Wire Gasless Automatic Feed Welding Machine

Description

Store category
Sign Up Now !
You may also like
MIG Welder Inverter 110V Flux Core Wire Gasless Automatic Feed Welding Machine
Product Description
Descriptions:
The Autool EWM518 welding machine applies the most advanced inversion technology.
The principle of inversion is to transform the power frequency of 50Hz/ 60Hz into direct current
and invert it into high frequency through high-power device IGBT, then perform voltage-drop and
commutation with the output high-power D.C power supply via Pulse Width Modulation (PWM).
Since the switch power inversion technology is adopted, the weight and volume decrease
greatly while the conversion efficiency increase of more than 30%.
The machine is self-shielded flux cored welding machine, which is equipped with unique
electronic reactor circuit, which can precisely control the short-circuiting transfer and mixed
transfer resulted in better performance than other machines. Compared with silicon controlled
welding machine and tapped welding, our products have the following advantages: stable wire
feed rate, portable, energy-saving, electromagnetic noise free.
Features:
1. Power compensation, wide net voltage, and good welding performance in the range of 90-140V
2. The minimum current can reach 30A, can welde the thin plate.
3. Good welding performance and significantly reduced spatter;
3. High inverter frequency, 60K Hz;
4. Below gear 1, can achieve standby and reduce power consumption;
5. Weldable 0.6-0.8 (0.9) flux cored wire;
6. Simple unified operation;
7. The first push-pull topology design in the world, coupled with energy recovery devices, to achieve a truly efficient and energy-saving, efficiency and power factors have been significantly improved
8. Increase motor speed feedback and improve wire feeding accuracy;
9. Unique dual U-shaped falling output characteristic design, good arc length stability, small splash, soft arc.
10.Self-shield flux cored wire,no protective gas needed.
11.With should strap design
Specifications:
Model: EWM518
Power supply（V):1 phases 120V±15%
Frequency（Hz） 50/60
No-load voltage(V) 55
Rated input current(A) 20
Output current adjustment
Range(A) :30 - 90
Output voltage(V) 15.5 - 18.5
Duty cycle 25%
Power factor >0.7
Efficiency(%) ≥80
Type of the wire feeder Internal
Welding-wire diameter (mm) 0.8
Insulation grade F
Protection grade IP21S
Weight without wire roller(kg) 5.5
Dimension:
(L*W*H mm) 360mm*135mm*240mm
Package Include:
1 set AUTOOL EWM 518 welder machine
Payment
Delivery details
Return Policy
About us
Contact us
Payment
1. We accept
PayPal
only.
2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal.
3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable.
4. Please make the payment within 3 days.
Delivery details
1. We ship to WORLDWIDE .
2. Item will be shipped out within 1-2 working days (except weekends and holidays) after the payment is cleared or received.
3. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.
4.International Buyers Please Note: 1)Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.
2)Import duties
, taxes and charges are the buyer’s responsibility,please understand.
Return Policy
Item may be returned for refund or replacement within 30 days of the purchase date.
Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.
About us
We are a professional worldwide Professional company.
We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer.Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
Contact us
Our normal business hour is Monday to Friday 9:00 AM to 6:00 PM Beijing TIME. Please email me through "MY MESSAGES" on eBay, if you have any questions about our listings or inventory or troubles. All messages be reply within 24 hours. Welcome your any-time parchase!
Feedback